News 05 Mar, 2014 France - CO2 Emission Reporting Requirements Members are advised of the recent introduction of carbon dioxide (CO 2 ) emission reporting requirements affecting all vessels carrying cargo, passengers or in ballast when proceeding to or from French ports. The requirements became mandatory on 1 October 2013 and are detailed in Article L. 1431-3 of the French Transport Code. Carriers affected by the regulations must now inform their customers, either cargo interests or passengers, of the mass of CO 2 emitted when their vessels call at French ports. The mass of emitted CO 2 is not limited to that produced by the vessel during its passage to and from a French port during the “operating phase”, but also includes the CO 2 emitted “upstream” in the production of the fuel – ie during the extraction of the oil, its refining and its supply to the vessel. The mass of emitted CO 2 is calculated by multiplying the fuel consumed during the voyage with the relevant emission factors published by the French Authorities. The emission factors provide the quantity of CO 2 produced in kilograms for both the “operating phase” and the “upstream phase” for each kilogram of fuel used (fuel oil, diesel, LNG and LPG). The total quantity is expressed as a mass in either grams (g), kilograms (kg) or tonnes (t) of CO 2 corresponding to the actual service provided to cargo interests or passengers respectively. In terms of goods, the provision of this information to cargo interests may be given either prior to or after the voyage depending on the agreement between the parties, but in any event must be provided within two months of the voyage being completed. For passengers, the information must be provided prior to the ticket being purchased, or if no ticket is issued, no later than completion of the passenger’s voyage. In both cases various methods may be used to provide emissions information including documents, email, text messages and even verbal advice depending on the na